What is non-curing rubber asphalt waterproof coating?

Non-curing rubber asphalt waterproof coating to rubber, asphalt, softening oil as the main component, add temperature control agent and filler mixture made in the use of years to maintain the sticky paste body of waterproof coating. For building engineering deformation joints and other special parts of the waterproofing treatment has outstanding results, widely used in non-exposed building waterproofing project.

The coating can close the cracks and capillary pores of the grass-roots level, and can adapt to the complex construction work surface. After contact with the air for a long time does not curing, always maintain the characteristics of viscous gel, self-healing ability, touching that sticky, difficult to peel, in a 20 ℃ still has good bonding performance. It can solve the waterproof layer fracture, flexural fatigue or in the high stress state of early aging and other problems caused by the transfer of stress to the waterproof layer due to the cracking of the grass-roots level.

At the same time, creeping material adhesion makes it able to close the pores and cracks of the grass-roots level, solve the waterproofing layer of water tampering problems, so that the waterproofing reliability has been greatly improved. Can also solve the existing waterproofing membrane and waterproof coating compound use of compatibility issues.

ZCR temperature control agent is a functional additive developed by Nanjing Tianshi specifically for waterproofing roll-roofing, non-curing rubber asphalt waterproofing coatings, etc.

ZCR temperature control agent can significantly improve the coil or non-curing high temperature resistance.

It can significantly reduce the viscosity of the product at high temperatures, improve the operation and ease of use of the product, reduce pollutant emissions, energy saving and environmental protection.

The modifier is compatible with other materials and has excellent dispersion stability, which can reduce production costs.

Non-curing add ZCR temperature control agent can make the case of 130 degrees to achieve the effect of spraying, low viscosity, while the high temperature at 70 degrees does not flow, to achieve high temperature qualified.

ZCR temperature control agent use instructions

Used in waterproofing membrane to add the amount of 0.5-1% of the total amount can be added, add time for the stone powder before adding, the temperature below 180 degrees, for non-curing rubber asphalt waterproof coating to add 1-2% of the total amount, add time for the stone powder before adding, the temperature below 160 degrees added.